Milesight MS-C2162-FIP Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 61
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
User Manual
www.milesight.com
33
IP Address Configuration
Parameters Function Introduction
Enable DHCP Get an IP address from the DHCP server automatically
Use fixed IP
address
IPv4 Address: Address used to identify a network camera on the network
IPv4 Subnet Mask: It is used to identify the subnet wherethe network camera
is located
IPv4 Default Router: The default router address
Primary DNS: The DNS Server translates the domain name to IP address
IPv6 Mode: Choose different mode for IPv6:Manual/Route Advertisement/
DHCPv6
IPv6 Address: IPv6 Address used to identify a network camera on the
network
IPv6 Prefix: Define the prefix length of IPv6 address
IPv6 Default Router : The default router IPv6 address
Other Settings
Figure 4-13
Parameters Function Introduction
HTTP Enable Start or stop using HTTP
HTTP Port Web GUI log on port, the default is 8080
RTSP Port Web GUI log on port via HTTPS, the default is 443
Multicast Group
Address
Support multicast
ONVIF RTSP Custom
If you want to remote access the camera via ONVIF, you need to enter your
public IP here
FTP Port The port of the FTP. Generally it is 21
QoS DSCP
The valid value range of the DSCP is 0-63.The bigger the DSCP value is ,the
higher the priority is.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 60 61

Comentarios a estos manuales

Sin comentarios